Hardwood floors bring a natural, warm beauty to your home. It need some special care and different clean methods to keep them looking beautiful, polished and fresh, so learning how to clean hardwood floors is essential. Read on to know the 5 do’s and 4 don’ts to keep hardwood floors clean and protect your hard wood floors.
Here are 5 common do’s on how to clean hardwood floors and keep them looking great.
Dust is like sandpaper and will slowly but surely wear through your hard wood floor, so regularly clean the dust on the hardwood floors is necessary. You can clean hardwood floors as the following guide in your routine cleaning.
Step 1: Move the small furniture and clean the dust on the floor with a microfiber broom or dry cloth. Gently move the furniture to prevent your hard wood floors from getting scuffed.
Step 2: Clean the corners and spaces between each piece of hardwood with vacuum and wet mop. Make sure not to use the beater bar in the vacuum, because it damages the floors. Wet mops are ideal for getting dirt out of the wood floor, but make sure to wring the mop almost dry.
Step 3: Wipe up excess water with dry cloth because standing water can damage the wood surfaces.
High-traffic areas need to be cleaned more often. And the wood floor will be worn easily at the high-traffic areas. So placing mats or rugs at entryways, kitchen or other high traffic zones to minimize the amount of dirt and debris that gets into your floors. The rugs will prolong the frequency of your clean and reduce the wear of your floor. Besides, nice-looking rugs decorate your home. Make sure to place the mats or rugs that are designed for wood floors. Some rubber-backed rugs can trap moisture and damage wood floors.
While the best way to clean hardwood floor is take some preventive measures and routine cleaning, a deeper clean is also necessary. Grime, dirt and oil will accumulate on the hardwood floors over time. Do you know how to deep clean hardwood floors?
Step 1: Mix a gentle PH-balanced soap or a little bit of dishwashing soap in warm water.
Step 2: Dunk the mop inside the mixture and wring out.
Step 3: Mop the stains area on floors repeatedly until clean.
TIP : You can spray the hardwood floor cleaner to the stains and wipe them with wet cloth. Never use sandpaper, steel wool, harsh chemicals and high alkaline products like ammonia because they can permanently damage the floors.
If you find a few scratches on your hard wood floors, don’t panic. Use a damp sponge with a small amount of baking soda to rub across the scuffs and scratches on floors gently.
After cleaning your floor, use boiling water and two teabags to make your floor sheen. Put two teabags into the boiling water for a few minutes. Take a soft cloth or sponge and wring it out in the tea and mop your floor. The tannic acid in tea makes your floor with a beautiful shine.
To clean hardwood floors and reduce the damage to your wood floors, here are the 4 don’ts advice for you.
If you don’t take off your shoes when you come home, the dirt and grit will be brought home. It will dirty and scratch your floors. Besides, the high-heeled shoes will damage your wood floors permanently.
Liquid such as water could cause swelling, warping, delamination, and joint-line separation damage to the hard wood floor. So never allow liquids to stand on your floor. Remember to close your window to avoid rain getting into your floor. If there is liquid that spills to the floor, clean it to dry immediately.
There is some grit in the dirty water, so mopping with dirty water defeats the cleaning purpose and scratches the wood floor. When mopping wood floor, change the water as often as needed to ensure you are using clean water.
Vinegar and water mixture is a common DIY cleaning ingredient, but not for wood floors. Because vinegar will corrode the wood floor and makes wood floor dingy.
It is easy to clean hardwood floors and keep them in great condition after reading the simple care tips above. Hope the 5 do’s and 4 don’ts will help you know how to keep hardwood floors clean.